Shop by Brand
View our current promotions eCommerce and Entrepreneurship Blog Learning Center
Home > Valves > Tempering Valves
Get $5 off any purchase of $30 or more when you use Google Checkout!

Watts Series L70AT Hot Water Extender Tempering Valve 3/4" (0215485)

Watts Series L70AT Hot Water Extender Tempering Valve 3/4 (0215485)
Brand:
Watts
Model:
L70AT

When you buy with Google Checkout, you can track all your orders in one place and shop with confidence knowing that Google protects you from unauthorized purchases.

Acceptance Mark
Watts Series L70AT Hot Water Extender Tempering Valve 3/4 (0215485) - 1
Watts
View all Watts products
Description
Watts Series L70AT Hot Water Extender Tempering Valve 3/4" (0215485)

Watts Series L70AT furnished in 3/4" size with threaded connections. Lower temperature range Series 70A Hot Water Extender Tempering Valves Sizes: 1/2" - 3/4", meets various installation requirements. They are available with sweat or threaded connections. Low Temperature range 100° to 130°F. The hydraulically-operated thermostat opens a spring loaded check in the cold water inlet allowing cold water to mix with the hot water. They have unusually high capacity for their size. For example, the 3/4" (20mm) 70A-T used for smaller domestic and residential requirements, passes over 10 gpm (38 lpm) with a 10 psi (70 bar) pressure drop. Maintenance is simple too, as the thermostat is easily removed and replaceable as a unit. Valve bodies are of brass construction that is recognized and required to resist corrosive domestic hot water conditions.
***WARNING*** WATTS HOT WATER EXTENDER TEMPERING VALVES CANNOT BE USED FOR TEMPERING WATER TEMPERATURE AT FIXTURES. SEVERE BODILY INJURY (i.e., SCALDING OR CHILLING) AND/OR DEATH MAY RESULT DEPENDING UPON SYSTEM WATER PRESSURE CHANGES AND/OR SUPPLY WATER TEMPERATURE CHANGES. A.S.S.E. STANDARD 1016 LISTED DEVICES SUCH AS WATTS MODELS L111 OR MMV SHOULD BE USED AT FIXTURES TO PREVENT POSSIBLE INJURY. The Watts Hot Water Temperature Control Valves are designed to be installed at or near the boiler or hot water heater. They are not designed to compensate for system pressure fluctuations and should not be used where ASSE 1016 devices are required. These WATTS valves should never be used to provide "anti-scald" or "anti-chill" service. When installing the Series 1170 valves in a radiant heat application, the components of the radiant heat system must be of materials with a construction capable of withstanding the high limit output temperatures of the heating boiler. If you are uncertain as to the product's adaptability for your application, please consult an authorized representative before installing or using the product.
Details and Features
  • Manufacturer and Model: Watts L70AT
  • Oversize: No
Related Products
Site Map - © Copyright 1999-2008 PlumberSurplus.com LLC, All Rights Reserved - OutdoorPros.com
HACKER SAFE certified sites prevent over 99.9% of hacker crime.
BizRate Customer Certified (GOLD) Site
Credit Card Processing
Acceptance Mark