Watts Combination Ball Valve and Relief Valve, Series BRVS 1" Solder Ends (0531216)

Description

Series BRVS Combination Ball Valve and Relief Valve
Pressure Setting 125 PSI

Watts Model BRVS (solder ends) and BRVT (thread ends) are a combination ball valve and relief valve in one easy to install device. They are designed to be used as water heater shutoff valves to provide both a means to shut off the water supply to the water heater and to provide protection against excess water pressure caused by thermal expansion. The valve uses a bronze body full port valve design which includes Teflon seats and a blow out proof stem design. The relief valve section includes a Viton ball and stainless steel spring. It is provided with a compression end fitting to provide a secure method of connecting a discharge line.
Sizes: 3/4" and 1" (20 and 25mm)

FEATURES:

Easy Installation - Installs in any position - Low profile design - Full port ball valve with virgin PTFE seats and seal - Stainless steel spring/Viton ball relief valve components - Secure compression fitting drain tube connection.

SPECIFICATIONS:

Water heater shutoff valves shall include built relief protection from water pressure in excess of (80, 100, 125 psi). Each valve shall be full port construction, bronze ASTM B-584 body, electroless nickel plated ASTM B-16 or B-124 brass ball, blowout proof ASTM B- 16 brass stem, virgin PTFE seats, PTFE stem packing and stem thrust bearing, viton relief ball and 302 stainless steel relief spring. Valves shall include brass compression nut and ferrule for connection of drain line. Valve shall be IAPMO listed. Valve shall be equal to Watts Regulator Company BRVT (threaded ends) or BRVS (solder ends).

TEMPERATURE/PRESSURE RATING:

Pressure Setting 125 PSI
Maximum Temperature: 210°F (99°C)
Maximum Pressure: Valve body rated to 400 psi (28 bars)

Details and Features

• Manufacturer and Model: Watts BRVS
• Oversize: No