Stiebel Eltron DHC-E 10 Electric Tankless Water Heater

Product Description

Stiebel Eltron DHC-E 10 Electric Tankless Water Heater

The Stiebel Eltron DHC-E 10 Electric Tankless Water Heater. Control temperature simply by setting a dial . Set the knob on the front cover and enjoy water temperatures between 86°F (30°C) and 125°F (52°C). Change the desired temperature at anytime. No purchase of a remote selector control is necessary. Advanced microprocessor technology ensures that the water temperature never deviates from the set point. No scalding. The electronic control system in the DHC-E does not allow the water temperature to go above 125°F (52°C), which eliminates the possibility that scalding may occur. On the other hand, 125°F (52°C) water is sufficiently hot for most uses. Simple design of plumbing system. There is no need for a T & P valve, drain or mixing valve. The design of the hot water plumbing system gets very simple and straight forward due to the advances introduced with the DHC-E.

Stiebel Eltron DHC-E 10 Electric Tankless Water Heater sleek design fits in anywhere due to its small dimensions and attractive housing the DHC-E can be left unconcealed in many applications. Seismic-proof construction. DHC-E is a tankless water heater system, and is thereby not subject to seismic code. There is no need for preventative construction, as required when using a bulky water storage heating system. Take the cover off. We have done our homework. As an international leader in the tankless electric water heating industry, STIEBEL ELTRON is proud to have pioneered this technology. Superior, reliable performance. The DHC-E has two temperature sensors and one flow sensor which feed their readings into the unit's proprietary microprocessor control. Three heating elements are engaged in stages, achieving the temperature you desire. The DHC-E continually monitors the water temperature it produces. DHC-E Tankless Electric Water Heaters deliver instant hot water.

Stiebel Eltron DHC-E 10 Electric Tankless Water Heater Specifications:
• Phase 1, 208/240 V, 7.2/9.6 KiloWatts, 35/40V
• Min. required circuit breaker size is 40/50 Amps
• Recommended wire size is AWG Copper 8
• Maximum temperature increase above ambient water temp. is 65 /87 @ 0.75 GPM, 49 /65 @ 1.00 GPM, or 33 /44 @ 1.50 GPM.
• Minimum Water flow to activate unit is 0.45 GPM/1.7 l/min.
• Pressure loss in unit is 1.46 PSI/0.1 bar
• Working pressure is 150 PSI/10 bar
• Water connections 1/2" NPT

Product Details and Features

• Manufacturer and Model: Stiebel Eltron DHC-E 10

Downloadable Product Documents