ProTech Systems FasNSeal FSVL605 5" Vent Length (6" long x 5" diameter) (300003)

List Price:: $36.33
Price:: $23.54
You Save:: $12.79 (35%)

Brand:: ProTech Systems
Model:: FSVL605
Material:: Stainless Steel

ProTech Systems FasNSeal FSVL605 5 Vent Length (6 long x 5 diameter) (300003) - 1

ProTech Systems FasNSeal FSVL605 5 Vent Length (6 long x 5 diameter) (300003) - 2

View all ProTech Systems products

Product Description

ProTech Systems FasNSeal FSVL604 4" Vent Length (6" long x 4" diameter) (300002)

FasNSeal® is a Special Gas Vent and Gas Vent Connector, made from AL29-4C® stainless steel and designed for use on natural gas or propane-fired appliances listed as Category II, III and IV or in Canada Type BH Gas Vent Systems having a rated operating temperature of 480 degrees F and maximum positive pressure of 6" water column. FasNSeal® provides horizontal or vertical venting for high efficiency gas boilers, furnaces, booster heaters, pool heaters, water heaters, unit heaters or tankless water heaters. FasNSeal® may also be used as a vent for Category I, natural gas or propane-fired heaters. FasNSeal® must be sized according to the heating appliance manufacturer's instructions, NFPA 211, NFPA 54 and any other relevant local building codes and regulations (see installation instructions for details).

Each vent length and component features a built-in mechanical locking band and gasket. Parts are simply pushed together to a stop bead, which renders the joints air and water- tight. By tightening the integrated mechanical locking band, parts are fastened together in seconds. FasNSeal® can be taken apart and reassembled in minutes, making inspection, maintenance or rerouting of FasNSeal® systems a breeze. Should a part or gasket ever become damaged, replacement takes less than five minutes and the integrity of the system is not compromised! Connecting FasNSeal® to a heater is done efficiently with one of our many adaptors approved by heating appliance manufacturers. Heating equipment can be fired up immediately upon completing a FasNSeal® installation, as no cure time or cleanup is required. FasNSeal® features a smooth weld seam inside and out, which is completely shielded during the TIG welding process. Contamination or molecular changes in the weld seam are avoided; no fillers are used in the welding process.

FasNSeal® is manufactured from AL29-4C®, a superferritic stainless steel designed for extreme resistance to chloride ion pitting, crevice corrosion and stress corrosion cracking, as well as general corrosion in oxidizing and moderately reducing environments. AL29-4C® is an ideal choice for resisting deleterious effects of corrosive condensates created by partially or fully condensing natural gas and propane fired heating appliances. FasNSeal® has been tested and is listed by Underwriters Laboratories, Inc. to UL 1738 and ULC-S636-95.

ProTech Systems FasNSeal FSVL604 4" Vent Length (6" long x 4" diameter) (300002) Features:
• AL29-4C® superferritic stainless steel
• Precision TIG-welded butt seam
• Factory built-in, replaceable gaskets
• Factory built-in locking band
• 4" Vent Diameter