Precision RO 6-Stage Water Treatment System by Joneca

Description

Precision RO 6-Stage Water Treatment System by Joneca

Joneca Corporation is a sister company of Anaheim Marketing International, which has been a leader in the worldwide distribution of food waste disposers for over 22 years. Anaheim Marketing International has overseas offices in China, Japan, and the United Kingdom and markets disposers in over 50 different countries.

Joneca Corporation is the manufacturer and distributor of food waste disposers and water treatment products in the North American market.

Precision RO 6-Stage Water Treatment System by Joneca Features:
Compact and Lightweight:
• The Precision-RO has been designed to take up less space under the sink. The complete system, including tank, is approximately the same height and width as a standard two gallon tank and valve assembly. The entire system is less than 14 inches in depth and can be lifted easily with one hand. The small footprint of this single vessel system makes it easier to install in cramped kitchen cabinetry.
• More Water To The Tank, Less Water To The Drain:
The single vessel system takes advantage of our new, higher flow membranes. A unique flow path gives this system a superior brine to product ratio. The combination of the two means more water to the tank, less water to the drain. The high flow membrane also ensures a fast tank refill. A completely drained tank will refill in a little under one hour.

Pre Plumbed:
• No preliminary tank or unit assembly is required. The tank, faucet, feed and drain lines are pre-plumbed in the unit and tested at the factory. Final onsite installation is faster and simpler.
Simple, Easy Cartridge Replacement:
• With only one P-RO Vessel, multi-stage water treatment cartridge, and one P-RO Polishing in-line filter to change once a year, the Precision-RO saves time and money in maintaining your water treatment system. Quick Connect Cartridges mean fast and easy removal and replacement by consumer.

Fast Flow:
• The Precision-RO uses the latest in system design and membrane technology to give you more water when you need it. This system delivers a 30% faster water flow from the faucet compared to older RO systems.

System Dimensions:
• 9.72" W x 13.75" D x 15.38" H (24.7 x 34.9 x 39.1 cm)

Precision RO Water Treatment System by Joneca Specifications:
Membrane:
• Production 40 GPD (151 LPD)
• TDS Rejection 95%
• Recovery1 26.3%
• Brine to Product 2.8:1
• 1 The percentage of the feed water available as reverse osmosis treated water under normal operating conditions.
• Tested at 60 psig (4 bar), 500ppm TDS municipal water, 77°F (25°C)

Feed Water Requirements:
• Pressure 40-80 psi (276 kPa - 552 kPa)
• Temp 40°F - 100°F (4°C - 38°C)
• TDS <2000 mg/L
• Chlorine <1.0 mg/L
• Turbidity <1 NTU
• SDI <5
• pH 4-8

Cartridge Information:
We recommend replacing the P-RO Vessel (multi-stage water
treatment cartridge), and the P-RO Polisher (inline post filter)
once a year. They can easily be removed and replaced by the consumer.

*Feed water must be potable, municipal water. Must be free of potential membrane foulants such as Iron, Hydrogen Sulfide and Manganese.

Details and Features

• Manufacturer and Model: Joneca P-RO-6
• Color: Blue
• Oversize: No