PPP P1-500 P-1 Primer Automatic Trap Primer Valve

Product Description

PPP P1-500 P-1 Primer Automatic Trap Primer Valve

Precision Plumbing Products

The Model P-1 & P-2 Tap Primer Valve is a precision device designed to deliver potable water to seldom used floor drains. A pressure drop of 5 to 10 P.S.I.G. is required to activate the priming valve. The Trap Primer must be installed on cold fresh water lines of 1 1/2" diameter or less.

PPP P1-500 P-1 Primer Automatic Trap Primer Valve Features:
• 1/2" NPT inlet/outlet
• Adjustable to line pressure
• Will prime from 3 or 4 drains using the PPP Inc. patented distribution system
• For every 20 feet of floor drain trap make-up water line the primer must be a minimum of one foot elevation from the finished floor
• Operating range: 35 to 75 P.S.I.G.
• Machined from corrosion resistant brass
• Piston operated, does not contain springs or diaphrams
• Easily adjusted to high or low preassures
• Includes integral vacuum breaker ports

* The priming valve must have a minimum elevation of 12 inches above the finished floor.

Product Details and Features

• Manufacturer and Model: PPP P1-500