PPP DU-U-625, Universal, 3/8" MIP x 5/8" comp ftgs, Trap Primer Distribution Unit

Product Description

PPP DU-U-625, Universal, 3/8" MIP x 5/8" comp ftgs, Trap Primer Distribution Unit

Precision Plumbing Products

The Trap Primer Distribution System is a patent design giving the installer a positive means to multiple prime more than one trap using a single precision plumbing trap priming valve. It is our recommendation that the distribution unit be mounted level. The fresh water supply line, running from the distrubution unit to the trap, must be 1/2" O.D. copper tube.

PPP DU-U-625, Universal, 3/8" MIP x 5/8" comp ftgs, Trap Primer Distribution Unit Features:
• 4 openings, 3/8" MIP x 1/2" compression fittings
• Unsurpassed Engineering - Patened Hyperbolic Metering Funnel assures true water distribution even when mounted off plumb.
• Versatality of Design - Each DU-U has four outlets and will be supplied with two outlet plugs, allowing the unit to evenly redistribute into a two, three or four drain application. Optional compressing fittings will be available with each unit.
• Simplicity of Use - Unlike some other "Me To" systems in the marketplace, users of the DU-U will have no need for installation instructions. There will be no pins to relocate, no letters to align, no screws to drop, no outles to guess at or anything else to fuss with costing valuable time. If the job is complete and you've got an open outlet, plug it using the pipe plugs supplied and move on.
• Extra Heavy Duty Construction - No expense was spared in designing the DU-U. The tough PVC compound utilized is thicker than necessary so the stress points will hold when required. Over 75 ft/lbs of torque is required to break the fittins from the body. That is more torque than is needed to tighten your wheel's lug nuts on your car.

Product Details and Features

• Manufacturer and Model: PPP DU-U-625