Hydro Systems HS 4452 RH Institutional Series Shower Enclosure

Description

Hydro Systems HS 4452 RH Institutional Series Shower Enclosure

Hydro Systems' mission continues to be developing quality whirlpool products at reasonable prices. As people across the nation continue to learn the therapeutic benefits of hydrotherapy, Hydro Systems continues to develop new technologies and features to create the ultimate bathing experience.

Hydro Systems HS 4452 RH Institutional Series Shower Enclosure Features:
• Shower with grab bars, rod and seat - Right hand
• Overall Dimensions Installed: 44"Wide x 52"Deep x 77" Height
• Gel Coat finish
• Flame spread rating of 200 or less
• Smoke density rating of 450 or less per ASTM E84
• Galvanized steel reinforced stiffeners
• Extra reinforcing in all critical areas
• Slip resistant floor
• Built-in soap shelf
• 21" x 42" Satin finish stainless steel grab bar horizontally mounted
• 24" Satin finish stainless steel grab bar vertically mounted
• folding wheelchair transfer
• 42" Satin finish stainless steel curtain rod installed
• Drain is brass body, self-caulking with stainless steel strainer
• Unit is packaged with cardboard on forklift pallet
• Full LTL wooden shipping crate available as option
• IAPMO/UPC - Uniform Plumbing Code - File 3307
• ANSI-Z124.2 - Standard for Plastic Shower Units
• ASTM F-446 - Grab Bars & Accessories
• ASTM F-462 - Slip Resistance
• ANSI-A117.1 Accessibility & Usability
• Hydro Systems producers are backed by our exclusive 5 year limited warranty.

Hydro Systems HS 4452 RH Institutional Series Shower Enclosure Specifications:
• Hydro Systems HS 4452 BF [3" dam] shower with 5 year limited warranty, 44" Wide x 52" Deep x 77" High with folding wheelchair transfer seat conforming to Title 24 accessibility standard, 1" O.D. satin finish stainless steel curtain rod, 21"x42" satin finish stainless steel grab bar on wet wall and rear wall, center rear drain with rear sloping integrally molded slip resistant floor.
• Units shall be molded of gel-coated fiberglass reinforced polyester resin.
• Units shall meet or exceed physical and performance requirement for Type 2 gel-coated fixtures [of ANSI Z124.2 showers].
• Standing/walking surfaces shall meet slip-resistance requirements of Consumer Safety Specification ASTM F-462, with static friction coefficient no less than 0.04.
• Handicapped grab bars shall be nom. 1½" O.D. and support a minimum load of 250lbs. in accordance with the Consumer Safety Specification ASTM F-446 and ANSI A117.1 guidelines.
• Units shall have a flame spread rating of 200 or less and a smoke density rating of 450 or less per ASTM E84.
• Units shall bear or have affixed to them a molded manufacturer's logo and/or permanent label showing manufacturer's name and model number and the seal of the Uniform Plumbing Code and shall be accompanied by detailed installation recommendations.
• Also affixed and for removal by the owner/occupant/user only, unit shall be equipped with user maintenance instructions and the full text of the limited warranty. As manufactured by Hydro Systems Inc. - Valencia, California.

Details and Features

• Manufacturer and Model: Hydro Systems HS 4452 RH
• Oversize: No
• Ground Shipping Only