General Wire P-XP-D Mini-Rooter XP Basic Unit with 75' x 1/2" Cable

Description

General Wire P-XP-D Mini-Rooter XP Basic Unit with 75' x 1/2" Cable

The General Wire P-XP-D Mini-Rooter XP Includes:
The Mini-Rooter XP Basic Unit Including MR-200-2 Drum, 8" Wheels, 1/3 HP Motor with Reverse Switch, 10' Power Cord, Ground Fault Interrupter, Water-Proof Air Foot Switch, Leather Gloves, and 75' x 1/2" Cable.

General Wire P-XP-D Mini-Rooter XP Features:
The Mini-Rooter XP gives you extra portability because 8" semi-pneumatic wheels let you keep the weight on the ground. An easy-grip handle folds down to save space and locks to use as an additional lifting handle. A roll bar protects the 1/3 hp motor when going up or down stairs. And the power cord and foot pedal can be stowed away on convenient cord wraps.

The XP gives you extra performance and value, enabling you to clear clogged drain lines from 1-1/4" to 4" in diameter with just one machine. The drum easily holds 75 feet of 3/8" or 1/2" cable and features a free floating inner drum with an integral distributor tube to help prevent cable tangling. By switching to the optional J-Drum or dual drum you can handle smaller drain lines.

You'll want to equip your XP with a power cable feed too. It makes a lot of tough jobs go much easier. Even with the power cable feed option, the drum is a snap to remove, taking less than a minute.

Of course the XP comes with an air foot pedal and ground fault circuit interrupter for safety, and General's patented Flexicore wire rope center cable for durability.

General Wire P-XP-D Mini-Rooter XP Specifications:
• Weight: 37 lbs. (17 kg) without cable.
• Dimensions: 18" deep x 12" wide x 19" high (45 cm x 30 cm x 46 cm).
• Drum: Capacity of 75 ft. of 3/8" or 1/2" Flexicore wire rope center cable. Integral distributor tube. Oilite bronze and ball thrust bearings.
• Cutter Set: Arrow Head, Boring Gimlet, 2" Side Cutter Blade, 1-1/2" U-Cutter.
• Motor: 1/3 hp, with forward-off-reverse switch, spring- loaded mounting for proper belt tension.
• Load Speed: 165 rpm.
• Belt Guard: High impact plastic.
• Power Cable Feed: Drives 1/2" and 3/8" cables.
• Foot Pedal: Leaves operator's hands free to control cable. Uses air pressure, so there's no electrical contact between pedal and motor.
• Power Cord: 10 ft. 3 wire vinyl covered with molded plug. In-line ground fault circuit interrupter.
• Leather Gloves: With reinforced palm for hand protection and proper slippage when guiding cable.

Details and Features

• Manufacturer and Model: General Wire P-XP-D
• Oversize: No
• Ground Shipping Only

Downloadable Documents