General Wire ER-E Easy Rooter Basic Unit with 100' x 5/8" Cable and SRCS-R Cutter Set

Description

General Wire ER-E Easy Rooter Basic Unit with 100' x 5/8" Cable and SRCS-R Cutter Set

The General Wire ER-E Easy Rooter Includes:
Easy Rooter ER Basic Unit including Machine Frame, 1/3 HP Capacitor Motor, Large Cage, Ground Fault Interrupter, Air Foot Switch, Safety Slip clutch, Leather Gloves, How-To Video, 20' Power Cord, 100' x 5/8" Cable, and SRCS-R Cutter Set.

General Wire ER-E Easy Rooter Features:
The Easy Rooter is a tough, easy-to-use machine. It has a rugged powder coated steel frame with roll bars to protect the motor and heavy-duty roller bearings in the cage for longer life and greater motor efficiency on long runs. The large zinc-plated cage holds 100' of 3/4" or 5/8" Flexicore cable, while optional smaller cage holds 100' of 1/2" cable.

An extra-long plated folding handle quickly locks in place, making it much easier to wheel the Easy Rooter to the job, without sacrificing the compact size needed for easy loading in a car trunk.

The Easy Rooter rolls smoothly on big 10" ball bearing wheels mounted on a half inch reinforced axle. Power is supplied by a 1/3 hp motor with capacitor start, thermal overload protection, and reverse switch. Standard safety features include an air-actuated foot pedal, ground fault circuit interrupter, and safety slip clutch.

Wire Rope Center Construction:
Heavy-gauge wire coiled tightly around 42-strand aircraft-type wire rope and heat treated. Has unequalled strength and the right amount of flexibility.

General Wire ER-E Easy Rooter Specifications:
• Weight: 80 lbs without cable.
•.Large Cage: Zinc plated 100' of 3/4" capacity with heavy duty roller bearings.
• Small Cage: Zinc plated 100' of 1/2" capacity with iolite bronze bushings.
• Motor: 1/3 HP heavy duty, capacitor start, thermal overload protection, Forward/Off/Reverse Switch.
• Safety Slip Clutch: Protects cable and operator.
• Foot Pedal: Leaves operator's hands free to control cable. Uses air pressure, so there's no electrical contact between pedal and motor.
• Power Cord: 20', 3 wire, vinyl covered with molded plug. Equipped with ground fault circuit interrupter.
• Wheels: 10" semi-pneumatic with roller bearings.
• Cables: 3/4" for 4-10" lines; 5/8" for 3-6" lines; 1/2" for 2-3" lines and 4" lines without roots.
• Cutter Set: Spear Head, 2" U-Cutter, 3" Heavy-Duty Side Cutter, 3" Heavy-duty Saw Blade, and Large Retriever.
• Leather Gloves: With reinforced palm for hand protection.

Details and Features

• Manufacturer and Model: General Wire ER-E
• Oversize: No
• Ground Shipping Only

Downloadable Documents