Think someone you know may be interested in this product? Enter the fields below, and we'll send them information about it.
Your Name:
Friend's Name:
Friend's Email:
Message: (Optional)

Eemax EX3512T "Thermostatic" Electric Tankless Water Heater

Eemax EX3512T "Thermostatic" Electric Tankless Water Heater

$278.66 & Eligible for Free Shipping
Not available
Not Currently Available
Ships internationally
The Eemax EX3512T "Thermostatic" Electric Tankless Water Heater.

To serve as a booster, eliminating long pipe runs, boosters for dishwashers and sanitation. Applications where precise temperature control is essential such as schools, hospitals and laboratories. Meets ANSI Z358.1 tepid water requirements for emergency eyewash. Anti-scale protection.

Recommended for hot or cold water feed, microprocessor temperature control for accurate temperature. Fitted with 1/2" copper pipe compression fittings. Standard range 100 to 140°F. Turn on .7 GPM, max 2 GPM.

Eemax EX3512T "Thermostatic" Electric Tankless Water Heater Applications:
• Boosters (to 180° F)
• Metering and sensor faucet compatible
• Low volume shower handset (.7 - 2 GPM)
• Schools/Hospitals/Nursing Homes/Laboratories
• Eliminate wait for hot water, long pipe runs
• Maintains accurate temperature continuously +/- 0.5°F

Eemax EX3512T "Thermostatic" Electric Tankless Water Heater Features:
• Fully Adjustable Temperature Range between 100-140°F. Special settings of higher or lower range available upon request.
• Eliminate costly mixing valves.
• On Demand Hot Water - no delay.
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local codes).
• Easy Installation - only one cold water line need be brought to installation - integral 1/2" compression fittings on bottom (no sweat connections).
• Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss).
• Thermostatic control reduces wide temperature fluctuation.
• Prevents Legionella Bacteria Growth.
• Meets ANSI Z358.1 Tepid Water Requirements.
• Anti-scald Protection.
• Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC".
• Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"; weight 3 lbs.
• Reduces calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element.
• Complies with handicap requirements.

Eemax EX3512T "Thermostatic" Electric Tankless Water Heater Specifications:
• Volts 120V
• KW 3.5kW
• Amps 29A
• Rise at 0.5 GPM 48°F
• Rise at 0.75 GPM 32°F
• Wire Size AWG 10
• Dimensions 10.75" x 5.25" x 2.125"
• Weight 3 lbs
• Element - Replaceable cartridge insert
• Connections: 1/2" compression

Eemax EX3512T "Thermostatic" Electric Tankless Water Heater Thermostat Accuracy:
• Thermostatic board maintains +/-0.5°F accuracy.
• Achieves full, pre-selected outlet temperature within 10 seconds after activation.
• Maintains consistent temperature.

* Units can be used at 208V with 25% reduced output.
* The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.

Specification Brochure Warranty

This product has no reviews
Write a Review
Display Submit a Question
Learning Center

The Learning Center is a one stop destination for everything from buying guides and expert advice to videos and DIY Guides.

Customers Also Bought

Eemax EX410SP Heater Element
Not available
$235.00   $268.00
Stiebel Eltron SHC 4.0 Mini-Tank Electric Water Heater with T&P, 4 Gallons, 120 Volts
Not available
More Options Available
Eligible for Free Shipping
Eemax EX95T "Thermostatic" Electric Tankless Water Heater
Not available
Eligible for Free Shipping