Delta 15-234 15" Stroke Production Drill Production Tilt Floor

Description

Delta 15-234 15" Stroke Production Drill Production Tilt Floor

After nearly 90 years of expertise in the woodworking business, DELTA Machinery has become one of the most revered brands in woodworking tools today. DELTA Machinery focuses on innovations to help the woodworker create masterpieces easier and with more precision.

The 15-234 includes motor and controls, belt and pulley guard, belt and motor pulley (supplied with 5/8" bore unless 1/2" bore is specified), self-locking depth stop, depth gage, self-ejecting chuck key.

Delta 15-234 15" Stroke Production Drill Production Tilt Floor Features:
• Extra-large spindle bearings "6 PLUS 6" and "VS6" spindle and spindle pulley are supported by four over-sized, pre-loaded, lubrcated-for-life ball bearings. Massive quill is a full 2" diameter. "VS6" has the same excellent construction, PLUS an extra bearing below the spindle pulley. This fine combination of features assures freedom from chatter, long, maintenance-free life and maximum pressure at the drill point.

• Wide, test-proven speed range gives you a true 10-to-1 speed ratio. You get the exact speed you need for every drillingjob on any material- 450 to 4700 rpm with a 1725 rpm motor and 300 to 3100 with an 1140 rpm motor.

• Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring loaded, rubber-tipped plunger that quickly restores correct belt tension.

• Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling... PLUS, the extra stroke required for clearing jigs and fixtures.

• Six speeds offer unbelievably wide range of speeds with a low-cost 1725 rpm motor- 425, 600, 1100, 2050, 3900 and 5500 rpm- 11.8 to 1 speed ratio. You can choose an extra-slow speed for drilling very hard materials... an extra-fast speed for working soft materials... or an optimum speed for any size bit material.

• Efficient variable-speed drive lets you select any spindle speed instantly while machine is running. A self-locking cam, plus a "snubber" feature, hold speed settings constant under all load conditions. Proper belt tension is automatically maintained for full power transmission.

Delta 15-234 15" Stroke Production Drill Production Tilt Floor Specifications:
• Motor: 3 Phase, 3/4 HP
• Motor Control: 24V Push-Button Station, Magnetic Starter, Transformer and 3-Leg Overload Protection (LVC)
• Column Diameter: 2-3/4"(70 mm)
• Table Tilt: 90° L and R
• Quill Stroke: 6" (152 mm)
• Quill Diameter: 2" (51 mm)
• Speeds: With 1725 RPM motor: 450 to 4700 RPM
With 1140 RPM motor: 300 to 3100 RPM
• Table Size: Standard: 11" x 14" (279 x 356 mm)
Production (overall): 15-1/2" x 21-1/2" (394 x 546 mm)
Production (inside of collant trough): 12" x 18" (305 x 457 mm)
• Spindle & Chuck Taper:
• Chuck to Table Capacity:
• Chuck to Base Capacity:
• Table Insert:
• Key Chuck Capacity: (With Std. Jacobs #33 taper) 1/2" (13 mm)
• Height: "6 PLUS 6: 71-1/2" (1816 mm)
VS6: 74" (1880 mm)
• Length: 6 PLUS 6: 71-1/2" (1816 mm)
VS6: 27-7/8" (708 mm)
• Width: Tilting Table: 15-1/2" (394 mm)
21-1/2" (546 mm)
• Weight: 225 lbs (102 kg)

Details and Features

• Manufacturer and Model: DELTA Machinery 15-234
• Oversize: No
• Ground Shipping Only