Bosch RP3P Powerstream Pro Electric Tankless Water Heater

Description

Bosch RP3P Powerstream Pro Electric Tankless Water Heater

Point-of-use hot water heaters can supply up to 2 sinks at a time and provide endless hot water and energy savings. These water heaters are easy to install and you will never have to worry about heat loss from long pipe runs. A point-of-use water heater is the perfect solution for home and office sinks... hot water without the wait.

Water is heated as it flows through the Powerstream, so you will never run out of hot water. Powerstream Pro features a compact design and can be mounted in any direction (with the exception of the RP12PT) - making it the ideal point-of-use water heater for virtually any sink installation.

Bosch RP3P Powerstream Pro Electric Tankless Water Heater Features:
• Compact, point-of-use tankless heater
• 99% efficient with zero stand-by loss
• Solid copper heat exchanger and copper-sheathed heating elements
• Most models are equipped with high/low kW settings
• Thermal cut-out protects elements from dry fire damage
• Units can be mounted in any direction (except RP12PT)
• Available in 6 models to accommodate a wide range of applications
• 5-Year warranty

Bosch RP3P Powerstream Pro Electric Tankless Water Heater Specifications:
• Volts - 120-110
• Amps - 29
• Element Resistance - 2x8
• High Setting - 3.4-3.0kW
• Wire Size - 10 GA
• Activation Rate (GPM) - .50
• Temperature Rise (°F) at Flow Rate (GPM) -
 o .50GPM - 41°F
 o .75GPM - 28°F
 o 1.0GPM - 20°F
 o 1.5GPM - n/a
 o 2.0GPM - n/a
 o 2.5GPM - n/a

NOTE: The inlet water temperature plus the degree rise from the heater will be the final delivered temperature. Only limited flow rates of hot water can be drawn from a hot water outlet, refer to flow/degree rise table below.

NOTE: Maximum degree rise is based on incoming water temperature of 50°F.

Details and Features

• Manufacturer and Model: Bosch RP3P
• Oversize: No

Downloadable Documents