Amtrol 110-P/1 FILL-TROL Expansion Tank, 4.4 Gallon (110-9)

Description

Amtrol 110-P/1 FILL-TROL Expansion Tank, 4.4 Gallon (110-9)

The Amtrol FILL-TROL 110-P/1 Expansion Tank system consists of a specially adapted EXTROL pre-pressurized, diaphragm-type expansion tank, the FILL-TROL, a specially designed, automatic, pressure-reducing fill valve, Purger, and Vent.
• Provides accurate system make up
• Fully Adjustable up to a maximum working pressure of 100 psig
• Factory pre-charged to 12 psig

Amtrol FILL-TROL 110-P/1 Expansion Tank Specifications:
• Model Number - 110-P/1
• Tank Volume (Gallons) - 4.4
• Max. Accept. Volume (Gallons) - 2.5
• A Height (Inches) - 17-3/8
• B Diameter (Inches) - 11
• System Conn. (NPTF) - 1
• Air Purge: 444
• Air Vent: 700-C
• Maximum Working Pressure = 100 PSIG
• Maximum Operating Temperature = 240°F
• Factory Precharge = 12 PSIG

How the Amtrol FILL-TROL 110-P/1 Expansion Tank System Works:
Water enters the FILL-TROL valve, pushing open the check valve, and flows into the heating system. The automatic shut-off valve is kept open by the diaphragm pressing against the pressure plate, raising the stem of the fill gate, which compresses the automatic shut-off valve spring. When the heating system reaches fill pressure (12 psig), the tank's diaphragm depresses, and the automatic shut-off valve is closed.

Whenever system pressure falls below 12 psig, the automatic shut-off valve is pressed open by the diaphragm. Make-up water flows into the system to restore pressure.

Details and Features

• Manufacturer and Model: Amtrol 110-P/1
• Oversize: No
• Ground Shipping Only

Downloadable Documents